Stand 5G210

Foundation
In 1995, Christian Grotholt and Ludger Gausling founded the 2G Energietechnik GmbH in Heek. 2G primarily distributes combined heat and power systems to customers from the agricultural sector who constantly need heat and electricity since the switch to animal husbandry in straw-free barns.

Innovation
With its own Research and Development department, 2G backs up its claim to global technological leadership. The agenitor presented by 2G in 2009 was the first CHP on the German market optimized to operate on biogas reaching an electrical output of 220 kW. The electrical efficiency was increased by 2.2 percent to 40.6%. That same year, 2G made its foray into the natural gas sector.

Digitalization
2G pioneers in the digitalization of its combined heat and power systems to increase customer benefit. 2016 marked the kickoff for my.2-g.com – a digital platform allowing the operators of 2G systems and 2G sales partners to continuously perfect their system management by means of the various applications and services it provides. With the introduction of I.R.I.S. two years later, 2G now possessed a self-developed artificial intelligence for the prediction of malfunctions and, consequently, the reduction of downtimes – a complete novelty.

Stand 4C15

Capable of producing designs that couldn’t be done using traditional fabrication methods, 3D Systems’ consultative approach and 3D printing solutions cost-effectively deliver more efficient components. Enabling new levels of performance, more energy-efficient carbon capture technology, our solutions contribute to accelerate development and deployment of cost-effective carbon capture technologies.

Stand 6C60

Aalberts surface technologies provides functional surface finishes. For 20 years, we have been active in the development and production of high-performance coatings for electrolysers and fuel cells. We were instrumental in one of the first series for fuel cell powered vehicles and supply for various applications in the hydrogen economy.

Stand 5H111

ABB is a leading technology company in electrification and automation, enabling a more sustainable and resource-efficient future. The company’s solutions combine technical expertise with software to improve the way things are made, moved, powered and operated. Building on more than 130 years of excellence, ABB’s approximately 105,000 employees strive to drive innovation to accelerate industry transformation.

Stand 5K95

Absolut Hydrogen, a subsidiary of Groupe Absolut, designs and offers technological solutions to manufacturers who wish to use liquid hydrogen as an energy carrier, particularly in all mobility sectors.

Stand 7E100

Driving down the cost of H2 production by improving the design of mesh components in Electrolyzer Anodes and Cathodes.
ACS designs and manufacturers unique, critical-to-function components and sub-assemblies that enable our customers’ larger systems
in noble industries. In addition to innovative product design, we deliver custom manufacturing solutions built around reliably
maintaining our customers’ critical product characteristics at scale in our factories located in Mexico, China, Romania, and India.

Stand 6F140

Welcome to the front-runner. Since 1995, we have been continually setting new standards for rapid prototype production in terms of both quality and speed. Employing innovative methods and technologies partially developed in-house, in conjunction with complete in-house management of processes and perfectly organized workflows. The results are high-precision, finished ready-to-install casting prototypes, produced in record time.

Stand 6D137

Located in the heart of the UK, Advanced Chemical Etching Ltd (ACE) uses innovative chemi etching processes to manufacture precision metal components at volume, providing today’s product development engineers greater flexibility in design and shorter lead times. ACE is the leader in innovative metal etching in the UK, and supplies the aerospace, automotive, electronics and communications sectors with precision metal etching and chemi etching – making the difference in innovation, technology and manufacturing.

Stand 5G30

Aeristech designs, develops and delivers patented high-speed electric motors, inverters and oil-free compressors, ideal for Hydrogen Fuel Cell Systems, HVAC, industrial air, e-boosting and more. Aeristechs advanced eCompressors are able to deliver a constant power regardless of the input voltage, are power-dense, efficient and cost-effective.

Stand 7A10

AeroDelft is a student-led team with the mission of proving and promoting liquid hydrogen as an alternative to conventional aviation fuels. AeroDelft currently operates two aircraft in its pursuit of the first manned liquid hydrogen powered flight.

Stand 6B110

Premium technologies from AERZEN. We are a manufacturer of twin-shaft rotary lobe machines such as positive displacement blowers, turbo blowers, screw compressors and rotary lobe compressors / screw blowers. Our high-performance products are used in the most demanding applications, e.g. in the chemical, petrochemical, energy, food or pharmaceutical industries.

Stand 5C50

We have become one of the technology leaders for etching technology in Europe. For us, there is no reason to rest on our laurels: we have once again set standards with pioneering etching laser technology and customer-oriented services such as Speedline .

Stand 6A100

AGRU. The Plastics Experts.
As a reliable, professional supplier, AGRU offers everything from semi-finished products through to technologically optimised injection moulded fittings, all from a single source. Founded back in 1948 by Alois Gruber senior in Austria, nowadays the company is one of the world‘s most important single-source suppliers for high-quality piping systems, semi-finished products, concrete protection liners and lining systems made from engineering plastics. With its expertise in producing engineering plastics components and developing tailored solutions, AGRU is present in virtually every sector of industry. See more about AGRU and its various product groups on www.agru.at.

Stand 5C70

AIC is going it’s way in the field of advanced heat transfer solutions. Our core activity is designing and manufacturing heat exchangers made of stainless steel for various applications. We design products from scratch, build them, test them and later manufacture them according to our OEMs’ demands.

Stand 5F55

AIP develops and manufactures special testing equipment (reproducible road driving simulation) for cars, trucks, motorcycles, ATV, tractors, forklift trucks, special vehicles, etc., in the areas of research and development, type approval and quality assurance.

Stand 6074

To make gas products available to gas professionals all over the world. We are the leading gas logistics specialist that enables manufacturers to deliver gas wherever their customers need it. So we help save lives, not just put bubbles in fizzy drinks! With our international presence and expertise in cryogenics and logistics, Air Flow has become a key player in the gas industry.

Stand 6C21

To make gas products available to gas professionals all over the world. We are the leading gas logistics specialist that enables manufacturers to deliver gas wherever their customers need it. So we help save lives, not just put bubbles in fizzy drinks! With our international presence and expertise in cryogenics and logistics, Air Flow has become a key player in the gas industry.

Stand 4D80

A world leader in gases, technologies and services for Industry and Health, Air Liquide is present in 73 countries with approximately 67,100 employees and serves more than 3.9 million customers and patients. Oxygen, nitrogen and hydrogen are essential small molecules for life, matter and energy.

Stand 6A10

Air Products is a world-leading industrial gases company in operation for over 80 years. The Company has two growth pillars driven by sustainability. Air Products’ base business provides essential industrial gases, related equipment and applications expertise to customers in dozens of industries. The Company also develops, engineers, builds, owns and operates some of the world’s largest industrial gas and carbon-capture projects, supplying world-scale clean hydrogen for global transportation, industrial markets, and the broader energy transition.

Stand 4F100

At Airco Process Technology we develop, design and deliver innovative biogas and carbon capture process plants that exceeds current technology, for the benefit of operations and the environment, – Carbon capture from flue gas streams by amine scrubbing for CCU (food-grade quality), CCS or for use in Power-to X

Stand 4D50

Aker Solutions delivers integrated solutions, products and services to the global energy industry. We enable low-carbon oil and gas production and develop renewable solutions to meet future energy needs. By combining innovative digital solutions and predictable project execution we accelerate the transition to sustainable energy production.

Stand 5B150

AKRIS is a leading specialist in the production of dies, punches and complete assemblies for compaction, stamping and embossing tools as they are used for the production of bipolar plates. All tools are made according to customer requirements and AKRIS can guarantee the highest form accuracy and surface quality.

Stand 4C130

Alfa Laval is leader in heat transfer, centrifugal separation and fluid handling. It is active the areas of Energy, Marine, and Food, offering its products and service to many industries. The company is committed to optimizing processes and driving progress to support customers achieving their business goals and sustainability targets.

Stand 5F60

Alleima provides a micro-factory on-site manufacturing solution for the high-pressure tubes that form a critical part of a hydrogen refueling station. The on-site tubing solution consists of a mobile, connected container that can be tailored to suit individual customer needs and be flexibly located where required, reducing waste, and enhancing safety, while also delivering time and cost savings.

Stand 5J150

Allengra is a developer and producer of cost-effective Ultrasonic Flowmeters and regulating Valves for gases and liquids. The flowmeters are able to not only measure the mass or volume flow but also the gas blend ratio (e.g. Hydrogen and NG) and thus able to determine the caloric value.

Stand 7C55

AMBARtec AG is a technology company in the energy and hydrogen storage and transport business. For our clients, we plan, develop and provide solutions for compact and long-term energy storage for transport, microgrids as well as for the future mobility.

Stand 5A100

Ames Goldsmith Ceimig is a manufacturer of platinum & iridium catalysts for PEM technology base in Dundee, Scotland. Our products are manufactured at GW scale and have a long history of in field use.

Stand 5I80

ANDRITZ Soutec is the leader in the area of high quality laser welding systems for flat and round parts and your specialist for laser and roll seam welding systems for a wide array of applications.

Stand 7C10

Bolin metal mesh was established in 2004 and factory covers an area of 20,000 square meters. We had passed ISO9001 International Quality Control Syestem Certification. Main products: stainless steel mesh, nickel mesh,titanium mesh, nickel-based alloy mesh and related deep processing mesh product.

Stand 4D180

Antonius is a leading producer of complex shapes, vessel heads, cones, expansion joints and other special products in exotic and special materials. Also we provide the manufacturing expertise necessary for the development of manufacturable products. Products that can actually be manufactured in the correct timeframe and for a competitive cost. Our experience with manufacturing large and complex metal shapes and assembled products makes us the ideal partner for companies that lack internal manufacturing expertise or capacity.

Stand 5H170

APEX Group is an established player in the renewable energy market. We are pioneers of the green energy transition. Our headquarter is in Rostock-Laage. Our business model is based on two pillars: Project business and storage business.

Stand 6C110

Asahi Kasei is a Japanese technology group with a broad range of highly diversified materials and solutions that not only enrich our modern life but also actively shape the world of tomorrow.

Stand 6B200

ATE produces highly efficient electric motors and generators for integration into customers systems. ATE customer specific motors are developed for highest rotating speeds, best power densities, extraordinary designs etc. In hydrogen technology, ATE motors and generators are typically working in micro gas turbines, CHP, fuel cells, compressor stations and others.

Stand 6B60

At Atlas Copco Gas and Process, we help customers prepare for tomorrow by designing, building, and servicing turbocompressors, gas screw compressors, turboexpanders, and API 610 centrifugal pumps for the hydrocarbon processing, power generation (both conventional and renewable) and industrial gases industries. Our passionate people are dedicated

Stand 5D29

We specialize in world-class engineering and innovative special machinery for composite manufacturing. Helping customers achieve the best solution for their production process is at the core of what we do. Still, more than that, we work alongside them, so no matter how big and grand or complex and small, we can create the machine or production line that completely fulfills their needs.

Stand 6E218

Since AvCarb’s early days in the 1960’s, we have earned a reputation for innovation, quality and excellence. Whether it is developing ablative materials for the U.S. space program or engineering advanced GDL products for the automotive industry, AvCarb has a rich history of commercializing enabling technologies.

Solving difficult problems with engineered carbon is what we do. AvCarb is proud to have the widest selection of carbon based-products available your electrochemical decarbonization application. With a portfolio that includes gas diffusion layers, papers, molded laminates, felts and woven fabrics we offer the perfect solution for your application.

Stand 5H60

AVL List GmbH (“AVL”) with its headquarters in Graz, is one of the world’s leading mobility technology companies for development, simulation and testing in the automotive industry, and in other sectors. Drawing on its pioneering spirit, the company provides concepts, solutions and methodologies for a greener, safer and better world of mobility. AVL constantly expands its portfolio of high-end methodologies and technologies in the areas of vehicle development and testing.

Stand 4E150

Axens is a group providing a complete range of solutions for the conversion of oil and biomass to cleaner fuels, the production and purification of major petrochemical intermediates, the chemical recycling of plastics and all natural gas treatment and conversion options.

Stand 5F50

Axis is an independent reservoir, well and facilities consultancy based in Aberdeen, Scotland. We provide specialist Exploration and Production, Decommissioning and Low Carbon expertise to the global energy industry and beyond.

Stand 6F35

From compensators to flexible metal hoses; from level controllers to traps; Our wide product range, ranging from valves to fire group products, offers superior solutions in many areas from the ship industry to solar energy systems.

Stand 4C110

Babcock & Wilcox (B&W) is a global leader and innovator in the energy transition — providing an extensive range of proven, clean power production technologies including our ClimateBright Decarbonizaton Technologies and our BrightGen and BrightLoop Hydrogen Technologies. We advocate for a cleaner world by helping our customers reduce greenhouse gases.

Stand 4E160

Baker Hughes is an energy technology company that provides solutions to energy and industrial customers worldwide. Built on a century of experience and with operations in over 120 countries, our innovative technologies and services are taking energy forward making it safer, cleaner and more efficient for people and the

Stand 4E90

Please visit the Baltimore Aircoil Company booth to talk with experts in the renewable energy areas of green hydrogen electrolysis and hydrogen compression / storage cooling solutions. We will also have experts available to talk about air contactors and value stream equipment for carbon capture solutions.

Stand 5D100

We seek to constantly develop innovative technologies and solutions for safety and protection in hazardous areas and are driven by the mission to achieve the best results for our customers. Efficiency, reliability and partnership provide the foundation for our everyday business life at BARTEC locations around the world.

Stand 5G80

BAUER KOMPRESSOREN, a subsidiary of the BAUER GROUP, was founded in 1946 and is now represented internationally by 22 subsidiaries, 15 additional sales offices, over 350 sales partners and 600 service points.

Stand 5F52

For more than 30 years, BAUM has been Europe’s leading supplier for highly corrosion-resistant and non-adhesive pipelines  in the fine chemistry, food- and pharmaceutical industry, in semiconductor applications, as well as the premium supplier for manufacturers in the area of electrolysis plants – worldwide

Stand 5C40

Beckhoff implements open automation systems based on PC Control technology that are used worldwide in a wide variety of different applications, ranging from machine tools to intelligent building control and the process industries.

Stand 6D120

BeijingHydrogenergy Technology Co., Ltd(Abb.BHT). is a Chinacompany established in Beijing Zhongguancun Science and Technology Park in 2003. Wehas production base covers an area of 34000㎡ and a building area of nearly 20,000㎡ in Suzhou Industrial Park. The mature product specifications include various water electrolysis hydrogen production equipment with hydrogen production capacity of 5 m³/ h to2000 m³/ h.

Stand 5J117

Beijing Tianhai Industry Co., Ltd boasts eight production units specialized inmanufacturing of gas storage and transportation equipment, an automotive chassis modification unit and a sales company in America.
BTIC can produce high pressure seamless steel cylinder, vehicle-used CNG cylinder, aluminium liner fully wrapped with carbon fibre composite cylinder, accumulator shells, plate drawing dissolved asbestos free acetylene cylinder, welded insulated cylinder, vehicle-used LNG cylinder, cryogenic tank in more than 800 sizes.

Stand 6E218

Our cutting edge technology transforms harmful, excessive greenhouse gas into clean, valuable carbon products.

Stand 6E215

Bergen Engines builds medium speed reciprocating engines for marine and land based applications.

Our engines can be found operating in some of the most demanding and hostile environments on earth, both on land and at sea.

Today, not only do we build the finest medium speed engines available, Bergen also supplies generator sets, provides modular power generating plants and partners for complete turn-key microgrid power solutions.

Stand 5H80

BIBUS METALS AG ist einer der führenden Lagerhalter und Lieferant für Stäbe, Bleche, Rohre, Draht und Band in Hochleistungswerkstoffen (Nickel,
Nickellegierungen, Titan und Titanlegierungen).

Stand 4E40

Bilfinger, as international industrial services provider, aims to enhance the efficiency of assets, ensure a high availability, reduce emissions and lower maintenance costs. Creating sustainable production processes for customers is becoming increasingly important. Bilfingers portfolio covers the entire value chain from consulting, engineering, manufacturing, assembly, maintenance, plant expansion to turnarounds.

Stand 5D20

In the context of making a decisive contribution to the success of the energy transition, the topic of hydrogen technologies as a green innovative technology is closely linked to the activities of the BIS Bremerhavener Gesellschaft für Investitionsförderung und Stadtentwicklung mbH on the green economy and innovation policy. The task of regional management is to establish hydrogen and fuel cell technology with the aim to develop Bremerhaven into a test region and a competence center for hydrogen applications.

Stand 6C24

In 2018, BiS Wells Limited acquired the Wells Valves product range. Since then, we have been redefined the product range and applied our product knowledge and experienced in-house valve design capability to produce and develop high specification products for the Hydrogen and Industrial Gas market sector.

Stand 5F50

The Partnership brings together BlueFloat Energy and Renantis with the aim of contributing to a world leading floating offshore wind industry in the UK, combining innovative technology with a plan to attract and grow a skilled Scottish workforce and stimulate a thriving local supply chain.

www.renantis.com / www.bluefloat.com

Stand 5F51

With over 800 employees, the BOA GROUP develops, produces and distributes flexible stainless steel components for engine management, exhaust systems, fuel systems and side components for passenger cars and heavy vehicles. In the industrial division, the BOA GROUP delivers flexible elements for applications in the Energy sector, Shipping, Rail and Heavy Engine industry.

Over the last 40 years we have been working on projects in all areas of the hydrogen chain: from generating, storage and transport to fueling, mobility and power supply. Whether you are engineering the electric car of tomorrow, developing a pioneering aircraft to fly on hydrogen, designing next-generation power supply units or working on future infrastructures to supply energy to buildings around the world, we are a partner you can rely on. We will help you co-design, engineer, manufacture, test and validate the right piping systems for your hydrogen machine or application.

Stand 7C10

Anping County Bolin Metal Wire Mesh Co., Ltd. was established in 2004 with registered capital of RMB ten million. Located in wire mesh hometown of China-Anping County.We have more than 10 years manufacturing experience. Now there are more than 90 employees and plant covers an area of 8,000 square meters.

Stand 7E60

One in two vehicles on the road in the world is equipped with a hydraulic sub-assembly designed and manufactured by the Bontaz Group. World leader, Bontaz vertically integrates industrial and technological know-how, ensuring competitiveness, agility and excellence in production and support for its customers.

Stand 5F30

To us, sustainability means driving environmental, social and governance (“ESG”) initiatives to deliver value to all stakeholders, both for today and tomorrow. We are guided by our Beliefs and committed to achieving our vision of a clean, energy-efficient world.

Stand 5E10

Systemlieferant fr Druckentlastungen, Ex-Schutz und Tankschutz – inklusive Planung, Installation und Wartung.

Stand 5I50

BORSIG ZM Compression GmbH, member of the BORSIG Group, manufactures: – Reciprocating compressor for process gases (API 618) – Integrally geared centrifugal compressors for process gases (API 614 and API 617) – BORSIG BlueLine (control system, emergency shutdown, machine protection, condition monitoring) for reciprocating and centrifugal compressor units.

Stand 6B20

Bramble Energy is powering the Net Zero agenda with our revolutionary fuel cell stack technology and is proving to be a real game changer in solving key challenges in the production of hydrogen fuel cells including: lead times, up front investment, manufacturing cost and scalability.

Stand 5D20

The city of Bremen in northern Germany has everything you could ask for: open, tolerant people, a track record in innovation, outstanding research and technology institutes, and a high quality of life. As Bremeninvest, we provide advice and support to companies from all over the world that are looking for a location and growth opportunities in Germany and northern Europe. Bremeninvest specialises in meeting the needs of international customers and offer a one-stop support service for their business requirements.

Stand 5D20

The ports of Bremen/Bremerhaven are among the most important universal ports in Europe. No matter whether containers, cars, bulk and bulk goods, hazardous goods or project loading – the terminals at Bremen and Bremerhaven work with almost every type of cargo. In addition, the port group with the Columbus Cruise Center Bremerhaven offers one of the most modern and powerful passenger terminals for cruise ships. The distinctive division of labor between Bremen and Bremerhaven is the guarantee for success and as a characteristic feature of the twin ports.

Stand 4F60

Bright Renewables is a global industry leader in membrane biogas upgrading technology. Bright’s product and technology portfolio include standardized containerized PurePac biogas upgraders, CO2 liquefaction technology, virtual pipeline, and carbon capture. Bright also offers service support and predictive maintenance. And bio-CNG and bio-LNG applications in addition to biomethane.

Stand 6E20

We at BROCKHAUS HYDROGEN make green hydrogen
– everywhere
– safe
– reliable
and affordable.

Stand 5G20

Bronkhorst High-Tech designs and manufactures precise and reliable mass flow and pressure meters and controllers. Bronkhorst mass flow controllers are applied for highly accurate, repeatable and fast control of process gases and liquids. Our vapour delivery systems are accurate and efficient and can be applied for atmospheric or vacuum processes.

Stand 6C27

We are a global provider of optical, industrial measurement technology for quality assurance of complex components of different shapes, sizes and materials. Our non-contact measuring systems are used in all areas of precision manufacturing.

Stand 4E60

Brusche Process Technology and LAB unite their unique complementary skills to bring high end carbon capture solutions to the market. LAB is specialist in and turnkey supplier of flue gas treatment systems. Brusche Process Technology develops innovative process installations, pilot and demo plants and has extensive knowledge of CCUS.

Stand 5C100

We are a globally operating premium distributor specializing in steel pipes and tubes, pipe-fittings and accessories. With a warehouse capacity of around 60,000 tonnes we are one of the largest stockholding traders in Europe. Companies place their trust in our high-quality products compliant with all common specifications and grades.

Stand 5E90

At Burckhardt Compression, we create leading compression solutions for a sustainable energy future. We are your partner for high-performance compression solutions – globally. As the leading compression manufacturer, we develop reliable, high-performance compression solutions in a true partnership with our customers, combining profound engineering expertise and the strongest product portfolio in the industry. We handle projects in a collaborative manner with competence, efficiency and speed.

We love to provide solutions that matter. Hands-on. We are your full-service provider for compressor systems and auxiliaries throughout the entire lifecycle – regardless of brand, model or application. We do everything to keep your compressors running as efficiently and sustainably as possible – anywhere is the world, at any time. No matter what compressor model, brand or other equipment such as engines, instruments, controls, coolers or compressor package upgrades, Burckhardt Compression provides sustainable solutions and outstanding customer support. Our commitment to safety, health and excellent stewardship of the environment is deeply rooted in our behavior, processes and everyday actions.

Stand 5C140

BUTTING CryoTech Germany evolved from a small forge into a globally leading MSE specialising in vacuum technology. The core business is in the field of vacuum-insulated transfer systems and the manufacture of cryogenic valves.

Stand 5K60

For over 80 years, the British Valve & Actuator Association has, on a not-for-profit basis, supported the British Valve industry and its supply chain with exclusive member services.

Stand 5D47

CALVERA is a benchmark industrial company with more than 40 years of experience in the design and manufacture of equipment for transport and storage of high-pressure hydrogen, as well as the manufacturing of HRS (Hydrogen Refueling Station) at 350 bar and 700 bar with the highest safety standards.

Stand 4A50

CO2 Capsol offers a cost-effective and environmentally friendly Carbon Capture technology utilizing the safe carbon capture solvent Hot Potassium Carbonate (HPC).

Stand 4C70

Stand 5E60

CARBONCO’s vision is to propose a CCUS business model that captures, utilizes, and stores carbon dioxide to customers who want to realize carbon neutrality, such as major power generation companies and hydrogen producers, to realize carbon neutrality together.

Stand 7E50

Cashco, Inc. is a leading manufacturer and worldwide marketer of a broad line of industrial control products. Products include control valves, regulators, controllers, pressure/vacuum relief vents, and flame and detonation arrestors. Cashco, Inc. services their customers in industries including chemical, terminal storage, oil & gas, electronics, food and pharmaceutical through a worldwide network of offices and representatives.

Stand 4E110

The CATACARB Process is a state-of-the-art CO2 removal and capture technology utilizing hot potassium carbonate (HPC) solution available for license from Eickmeyer & Associates, Inc. Since the first implementation in 1961, over 150 CATACARB units have been constructed around the globe enabling a variety of industries to selectively remove CO2 from mixed-composition gas streams. Each day, CATACARB units remove over 50,000 tons of CO2.

Stand 5F50

CCU International provide next-generation patented carbon capture and refinement technology for emitters of all sizes across all industries. CCU International enables the capture, processing, and liquefaction of captured carbon dioxide (CO2) from industry flue and chimney stacks.

Stand 5A50

We reduce volume and weight with high rotational speed. Celeroton is a world leading supplier of turbo compressors with gas bearings. We are a system provider for compressors including converters for fuel cells, noble gas recirculation and compression, gas recovery, pneumatics, cryogenics, clean/sterile air supply and other industrial applications.

Stand 5J160

CFX Berlin provides numerical simulation software and solutions for fluid mechanics, thermodynamics, electromagnetics, structural mechanics and coupled physics analysis. We are the developer of TwinMesh software, a unique meshing solution for reliable CFD analysis of rotary positive displacement machines.

Stand 5D29

CGI delivers an end-to-end portfolio of capabilities, from strategic IT and business consulting to systems integration, managed IT and business process services and intellectual property solutions.

Stand 5H114

Chart’s vision is to be the global leader in the design, engineering and manufacturing of cryogenic process technologies and equipment for the Nexus of Clean™ – clean power, clean water, clean food and clean industrials; regardless of molecule. Our products are used in every phase of the liquid gas supply chain facilitating the use of liquid hydrogen and LNG as clean burning fuels for energy and transportation and decarbonization of hard to abate industries through our carbon capture technology. The acquisition of Howden perfectly complements our equipment and solution portfolio and doubles our global engineering team to over 1,500.

Stand 7E54

We design, manufacture and install FRP/GRP and FRP Dual Laminate equipments with application in industries such as Chemical, Pharmaceutical, Fertilizer, Paper & pulp, Food Processing, Water and waste water, Textile, Metallurgical, Mining, Paints, Pigments & Dyestuff, Power plants, etc.

Stand 7E54

Chemical Process Piping Pvt Ltd is a pioneer and market leader in the field of Design, Manufacture and Installation of FRP and Thermoplastic lined FRP piping serving for nearly 6 decades. CPP has made a mark in the Green H2 market with piping for projects in USA and Saudi Arabia.

Stand 5D30

The Chemours Company, a global leader in titanium technologies, fluoroproducts, and chemical solutions, is a different kind of chemistry company dedicated to making chemistry as responsible as it is essential.

With the knowledge inside Nafion™ membranes and dispersions, we help customers create clean hydrogen from water electrolysis, enabling the hydrogen economy. We are committed to advancing the electrolysis technology to reduce the cost of ownership without sacrificing the reliability the industry expects from Nafion™ membranes and dispersions.

Stand 4C30

Chromalox, a Spirax-Sarco Engineering plc company, is a premium provider of electric thermal technologies globally. We engineer advanced thermal solutions that deliver superior performance for our customer’s sustainable and mission critical applications. For more than 100 years, Chromalox has shaped the history of industrial process heating, and today leads the future transformation in energy, materials, advanced technology, and health and nutrition.

Stand 6B170

Chungnam Techno Park serves as a prominent hub for industry and technological innovation within the Chungnam region, taking on the crucial role of supporting SMEs and exploring cutting-edge industrial technologies. Moreover, it plays a significant role in leading the industrial growth of Chungnam by securing budgets from the Chungnam Provincial Office and the central government. It provides essential support to various sectors, including the display industry, hydrogen industry, secondary battery production, eco-friendly mobility solutions, bio industry, and the emerging field of ICT convergence, among others.

Stand 7D15

Hale Hamilton has, since 1947 been in the business of the design, development, manufacturing, supply and support of high performance / high pressure valves and valve systems, required to perform under critical conditions of pressure, flow & cleanliness, in satisfying the demanding technical requirements of defence and industrial customer’s world-wide. Hale Hamilton is an ISO9001:2000 Company.

Stand 5I150

Everything began with the world premiere in 1960 of the company’s invention – the coaxial valve. This pioneering spirit has lived on until today in our company: With an acute inventor’s mindset and a passion for innovation, custom solutions are constantly being created which are optimally tailored to the requirements of our customers and partners. On many occasions, our innovations have even solved potential issues of which our customers may not even have been aware. Our guiding principle is: Pioneers Forever!

Stand 5A130

Coatema Coating Machinery GmbH designs and produces Sheet-to-Sheet and Roll-to-Roll equipment for the coating, printing and laminating sectors.

For more than 40 years Coatema has designed and built laboratory equipment and pilot/production plants for traditional markets such as the textile sector and the materials converting market.

Stand 6C80

Consilium is a producer of Fire, Gas and Flame safety technologies for the marine, energy, transport, industrial and building sectors. Our commitment goes beyond the products: We protect lives, production and assets. With representations in 24 countries and with 55 offices around the world, we cover all time zones, and are always close to you.

Consilium has an installed base of over 75,000 fire, gas and flame detection systems in the marine, transport, energy and building sectors. Our journey began in 1912, and since then we have been driven by innovation. In 1959 and 1967 we introduced our gas and fire detection systems, which have become important milestones.
2023 product releases:

•  – Hydrogen Gas Detector: The Hydrogen-ready MPS sensor makes gas detection a breeze on the industrial market. No drift, no sensor poisoning, and long-lasting life (5+ years) are just a few benefits of this game changing technology.
•  – Hydrogen Flame Detector: Designed for hazardous industries where fast H2 flame detection is critical and nuisance alarms are not an option

Stand 6F110

Contec is a classic, medium-sized German company with the associated high quality standards. A total of four business areas determine our product policy.

In addition to oil mist filtration products, our business areas include air and gas filtration, liquid filtration and level measurement. We are leaders in the field of industrially used oil mist separators, which we invented ourselves, by the way. Our services range from engineering and planning to the manufacture of special filter systems. Almost every product is individually tailored to the respective customer needs.

Stand 6E210

Convion Ltd. is a leading fuel cell system developer commercializing solid oxide fuel cell systems for distributed power generation and hydrogen production in industrial and commercial applications. Our products are designed for premium energy efficiency, reliability and operational flexibility. Convion provides products for sustainable power generation and hydrogen production.

Stand 5E70

For over 100 years, Cook Compression has partnered with OEMs and end users to design innovative solutions for the gas compression industry, including a long history of engineered products with proven success in refining, petrochemical, and industrial hydrogen applications.

Today, we’re leveraging this experience and investing in the research and testing capabilities needed to develop durable materials and valve and cylinder seal designs suitable for the gas compositions, speeds, and pressures expected for hydrogen storage, pipeline, and refueling applications.

Stand 5J40

CoorsTek is a 110-year-old materials science company that develops proprietary technical ceramic material formulations. With manufacturing, sales, and research facilities around the world, we serve a wide variety of essential industries by creating new materials and technologies to meet our customers’ most demanding component needs and challenges. Our success is achieved by closely collaborating with our customers through component design to material selection to the most efficient manufacturing process to achieve their business goals. Today our company is led by the fifth generation of Coors family members. We have thrived under our generational leadership that has taken us from porcelain labware to highly advanced ceramic materials.

Stand 7C45

You can achieve optimal results with stable flight performance based-on iPOP’s BVLOS Drone Technology. iPOP’s Drone can be operated automatically with drone station on schedule.

It can apply to variety of field like agricultural, disaster monitoring, defense, etc.

Stand 5B120

Covalion is a brand for hydrogen technologies and 2nd-Life battery storage of the worldwide operating company Framatome GmbH, which is part of the EDF group. We offer hydrogen refueling stations, hydrogen power plants and engineering services.

Stand 6F90

As an expert in thermoplastic composite pressure vessels, COVESS produces cold and hot water thermoplastic expansion tanks and helps businesses to set up the production of sustainable custom made cylinders capable of containing all kinds of liquids or gasses at any pressure and temperature. Our high quality lightweight pressure vessels massively contribute to the sustainability of your products and ensure your business to be ready for the future.

Stand 5J130

CPU Hydrogen Power Technology (Suzhou) Co., Ltd. is located in Suzhou, China and is one of the first enterprises to provide large-scale electrolytic hydrogen production equipment. Having its own factory, production line, and R&D team. We have three hydrogen production system series with the hydrogen production capacity from 50-1000 Nm3/h.

Stand 5F53

For hydrogen energy to be an effective and efficient alternative to fossil fuels, liquefaction plants, storage facilities, transportation methods and pipelines must be outfitted with the latest technology.

Crane ChemPharma & Energy’s CRANE® CRYOFLO™ ,  a new line of Pipe Valves and Fittings is focused on Solving Customer’s Toughest Challenges within the Hydrogen Industry.

Stand 5F50

Crondall Energy is a leading independent consultancy providing strategic, commercial and technical services for offshore energy projects using floating and subsea technologies.

We specialise in Energy Transition, Offshore Renewables, Floating Production, Subsea & Pipelines, Business Consulting & Technology Development.

Stand 5F50

Crowcon blends more than 50 years of gas safety experience with future-focused thinking to deliver cleaner, safer and healthier environments worldwide. As global leaders in gas sensing solutions, we have a solid reputation for reliability, innovation and customer service.

Stand 5E140

“Expert in cryogenic rotating machines and solutions for applications in medical and industrial gas, natural gas, hydrogen and clean energy.

Cryostar’s commitment to the gases and renewable energy industries is to constantly strive to set the highest standards, now and in the future.”

Stand 5I160

“CRYOWORLD is an advanced specialist in engineering and fabrication of cryogenic projects and is firmly based on extensive experience in both the theoretical as well as the practical field. Our core business is design, production, testing and installation of Helium-, Nitrogen- and other custom designed cryogenic equipment.

In our production facility our dedicated engineers and specialists make sure every project meets the highest quality standards. The cryogenic systems for various liquid gasses are used in industrial and scientific applications and delivered to renowned companies and institutes worldwide.”

Stand 5J10

CS Combustion Solutions is your partner for combustion systems for refinery, chemistry, petrochemistry, pharma-industry, power generation and waste to energy plants. CS designs and delivers own burner systems and incinerators for liquid and gaseous media. All possible liquids or gaseous media may be handled, as well as standard fuels. Typical fuels are liquid Sulphur, Acid Gas, Spent Acid, process Offgases, waste water, high-viscosity sludges etc.

Stand 5K70

We offer fully comprehensive measurement solutions for electric and hybrid vehicles in road tests and on test benches: consulting by our experts, measurement hardware (HV-safe and standard), data loggers, cables and accessories as well as software solutions (with our partners). With these capabilities, we actively accompany the change to e-mobility.

Stand 7B75

Compression solutions and technologies for natural gas, biomethane and hydrogen refuelling.
Cubogas is an international leader in the design, development and production of technological solutions for the supply of natural gas, biomethane and hydrogen for automotive use.

Stand 6C24

Cylinders Holding is a Czech company that has been continuously producing pressure cylinders for more than 115 years. After massive investment, it is a global producer with the largest share in the European steel cylinder market. The company’s export targets all the continents. In selected territories, the holding builds not only a market position but also new production facilities.

Stand 7D30

Daeyang, we possess all the core technologies required for sensor development, including MEMS (Micro Electro Mechanical System), SoC design, simulation, and reliability testing.

The Daeyang’s sensor business brand has been using “The Sensor” and “Stronger” since 2012.

We have been developing pressure sensor modules for ESC (Electronic Stability Control) systems for 4 years and supplying them to HKMC and SYMC since 2014.

Stand 6B167

For 35 years, DAM Group has been designing turnkey test and measurement solutions, particularly for the mobility industries.

Solutions for the hydrogen value chain:

– Leak testing of bipolar plates (PEM/SOFC) and MEAs

– Characterization of cells and conditioning equipment

– High-pressure testing of integrated systems.

Location: France and China.

Stand 6F20

Delta, founded in 1971, is a global leader in power and thermal management solutions and a major player in several product segments such as industrial automation, displays, and networking. Its mission statement, “To provide innovative, clean and energy-efficient solutions for a better tomorrow,” focuses on addressing key environmental issues such as global climate change. As an energy-saving solutions provider with core competencies in power electronics and innovative research and development, Delta’s business domains include Power Electronics, Automation, and Infrastructure. Delta has 158 sales offices, 72 R&D centers and 48 manufacturing facilities worldwide.

Stand 4F50

Ultra Pro is an ultrasound camera used by industry professionals and inspection specialists to pinpoint gas leaks of any type and partial discharges in Oil & Gas, Power Generation and Chemistry fields. Ultrasound imaging works for any type of gas: hydrogen, compressed air, methane, nitrogen, steam, and vacuum leaks.

Ultra Pro detects gas leaks by the specific sounds they emit, using an integrated microphone array of 124 elements.

Gas leaks can be detected meters away, without contact with the gas, and in unexpected locations. Inspection times are up to 10 times faster than with other techniques.–

Stand 5I200

Hydrogen research as the basis for the energy transition

The storage and transport of hydrogen is an essential success factor for the development of a future energy infrastructure. At this year’s DLR stand in Hall 5 No. I200 you can get a size impression of a pipeline section of the future Northwest Hydrogen Network. The hydrogen-suitable pipeline of the Wilhelmshaven – Leer gas connection is characterised by its special steel composition, which counteracts H2 embrittlement. We also provide insights into the interior of a current hydrogen vehicle tank. The plastic base body encased in carbon fibre as a Type IV tank stores approx. 2 kg of hydrogen at a pressure of 700 bar. Using three tanks of this type, car journeys of more than 600 km are thus made possible. These exhibits illustrate the influence of components on hydrogen quality that are being investigated at DLR for use in fuel cell systems. In several projects, DLR is currently investigating analytical methods for determining the purity of hydrogen at various system interfaces.

Green hydrogen is also a promising alternative for future low-emission energy systems. Electrolysers and fuel cells are ideally suited for producing hydrogen or other highly efficient fuels or converting them into electricity and heat. We present our analytical methods and competences in this field, which is increasingly in demand, with examples and materials. New durable Pt-free materials for electrolysers and fuel cells are the focus of electrochemical energy storage.

The film contribution on the integration of energy systems delves into the topic of sustainable industries using hydrogen. High temperature electrolysis can produce hydrogen and synthetic gases. This uses water, electricity from renewable energy sources, heat and – uniquely – CO2 from air or industrial flue gases. These end products can then be further processed by various industries or can be reconverted into electricity.

Stand 7E45

Founded in 1915, Donaldson is a global leader in developing innovative filtration products and solutions. We serve customers across nearly every industry and sector, from small business owners to world’s biggest original equipment manufacturers. With a relentless passion for innovative and decades of expertise, our global team is “Advancing Filtration For A Cleaner World”.

Stand 5G61

Dondel Industrial Co., Ltd is a leading Chinese supplier for the Hydrogen energy sector, heavily invested in R&D and a state-of-the-art manufacturing facility for the production of Diaphragm Compressors and Hydrogen Fuel Cell BOP such as Hydrogen Circulating Pumps, Air Compressors for Hydrogen Fuel Cells.

Stand 4C75

DONIT TESNIT, d.o.o. is one of the leading gasket, gasket sheet and sealing solution providers. We offer top-of-the-line solutions for all of your static sealing challenges. This is achieved through an understanding of our customers’ needs, our high-quality products, extensive know-how in application engineering and customer driven innovation.

Stand 6D110

Dott. Ing. Mario Cozzani S.r.l. has always been orientated towards the compressor manufacturers, who require high quality products with constant higher performances thus leading us to study new valve solutions.

Stand 5E60

Dover Fueling Solutions comprises the product brands of Wayne Fueling Systems, OPW FMS, ClearView, Tokheim, ProGauge, Fairbanks, LIQAL and AvaLAN, and delivers advanced fuel dispensing equipment, clean energy solutions, electronic systems and payment, automatic tank gauging and wetstock management solutions to customers worldwide.

Stand 6D60

Dr. Ryll Lab is an engineering company and laboratory specialising in hydrogen quality monitoring. As the first company on the market, we are able to measure the hydrogen quality directly on site in real time according to ISO 14687, SAEJ2719 or DIN EN 17124 with our mobile laboratory.

Stand 6D20

Optimal performance, efficiency and availability of your vacuum and overpressure generators. With our competent service. In our service centers or on site. Regardless of the brand or the application. The industry’s largest global service network is at your fingertips. Around the clock. For smooth processes. For your certainty that everything is running smoothly.

Stand 6C19

Dräger manufactures medical and safety technology products. In so doing, we protect, support, and save people’s lives around the world in hospitals, with fire departments, emergency services, authorities, and in mining as well as industry. Founded in Lübeck in 1889, Dräger has grown into a worldwide, listed enterprise in its fifth generation as a family-run business. Dräger has more than 16,000 employees worldwide and is present in over 190 countries around the globe. In 2022, the company generated net sales of EUR 3 billion.

Stand 5150

Our comprehensive systems expertise in electric drive technology and power electronics is based on our specialist knowledge of electrical machines with related inverters/DC-DC converters, including the associated software, along with the courage to change perspective. We have the expertise to combine single components into individual systems solutions. By pooling our experience, knowledge and technology, we are able to meet your requirements with precision.

Stand 5C129

DuPont is a leading global science and technology company committed to developing innovative solutions to some of the world’s most pressing challenges, including those within the hydrogen transition. Vespel® parts and shapes are a family of high-performance plastics with excellent mechanical and thermal properties and low hydrogen permeation. Kalrez® is a line of perfluoroelastomer seals which are highly resistant to extreme temperatures, chemicals, and pressures. Both are known for their outstanding reliability in applications in extreme environments.

Stand 4B60

The German Hydrogen and Fuel Cell Association (DWV) has been campaigning for a sustainable, green hydrogen and fuel cell industry since 1996. DWV is also committed to international, sustainable cooperation. With over 440 personal and over 1182 member companies, the association thus represents a significant part of the German economy.

Stand 6B130

Dynex has over 60 years of experience in designing and manufacturing converters for a wide variety of applications, we are now using our expertise to provide highly efficient, high reliability, small footprint solutions for Electrolysis power supplies, working with our partners to find the right solution for their needs.

Stand 4C80

As change agent for the sustainability transition E.ON Energy Infrastructure Solutions offers decentralized, sustainable and energy efficient solutions to decarbonize industries and cities. E.ON will deliver full services along the carbon value chain for energy-intense industrial sites, leveraging its solution E.ON IQ Energy for a full digital integration.

Stand 7A30

e+a is one of the world’s leading manufacturers of motor elements and built-in motors (Permanent Magnet and Induction Motors & Generators) developed and manufactured by order of the company’s customers and according to their specific requirements. e+a components are used in FuelCell blowers, Hydrogen pumps and pressure letdown stations.

Stand 5G220

E+E Elektronik develops and produces sensing elements, modules and sensors for air velocity, CO2, dew point, flow, humidity, moisture in oil, pressure and temperature. Hand-held measuring devices, humidity calibration systems and calibration services complete the Austrian sensor specialist’s product portfolio.

Stand 5G200

Europes leading supplier in the area of power electronics for R & D and industrial application. More than 300 qualified associates research, develop and manufacture high-tech equipment for laboratory power supply, high power mains adaptors and electronic loads with or without power feedback.

Stand 6F60

OUR SERVICES COVER FEASIBILITY STUDIES, CONCEPT DEVELOPMENT, FRONT END ENGINEERING AND DESIGN (FEED), PLANT DESIGN, AUXILIARIES DESIGN AND PRODUCTION, PROJECT MANAGEMENT, TO MAINTENANCE AND RELOCATIONS FOR SUSTAINABLE AND CONVENTIONAL AND THERMAL POWER PLANTS

Stand 6B169

The ebm-papst Group, a family-owned company headquartered in Mulfingen, Germany, is a globally leading manufacturer of fans and drives. Since it was founded in 1963, the technology leader has set international industry standards with its core expertise in motor technology, electronics, digitalization, and aerodynamics. With over 20,000 products, ebm-papst offers customized, energy-efficient and intelligent solutions for virtually any ventilation and drive technology requirement.

Stand 7C70

As of January 1, 2020, Eco Analytics GmbH will be operational for you in Germany. In our branch in Germany we also offer tailor-made solutions in the field of fixed and portable gas warning devices. In addition, the product portfolio is expanded to include fire alarm, intruder alarm and video surveillance.

Stand 7E35

Ecoclean offers alkaline electrolyzers for the production of green hydrogen. As a globally positioned system integrator, we offer not only the electrolyzers but also the necessary accessories from water treatment to gas compression.

Ecoclean offers products, solutions and services along the entire value chain. In this way, we support our customers on their way to a sustainable future – no matter which route they are currently on. Hydrogen is the “fuel of the future” for sustainable and CO2-neutral supply in all sectors. Our portfolio includes stand-alone solutions or turnkey systems in the range of 1-20 MW. info@ecolyzer.com

Stand 4D15

Ecomembrane core business is the production of PVC coated polyester fiber fabric membranes and components for biogas/biomethane powered plants. Recently the Company has developped gasholder for CO2 and Hydrogen. It is present with more than 1,000 installations around the world with offices and production units in Italy and USA.

Stand 5F110

Our 360° development expertise for vehicles and production facilities as well as our independence make us a recognised engineering partner during the entire development process: from strategy development through the concept phase and series to production planning and optimisation. We are in an ideal position to further expand our role as the world’s largest independent engineering partner to the mobility industry.

Stand 6B80

Stand 4B60

The Renewable Energy Hamburg Cluster promotes and supports activities of the renewable energy sector in the Hamburg metropolitan area as well as joint projects and cooperation world-wide. The organisation includes  250+ companies. Fields of activity are onshore and offshore wind, solar power, renewable heat, sector coupling and green hydrogen

Stand 5D29

Eekels has been active in the Marine & Offshore and Industry & Infrastructure market segments for over 110 years. With approximately 750 employees, Eekels carries out projects and maintenance & service work in the disciplines of technical automation, electrical engineering and mechanical engineering.

Eekels has specific expertise in the field of electrical drive systems, shore power connection systems, marine automation systems and process automation. Eekels takes care of the entire process from engineering, panel construction, implementation, commissioning to maintenance and service.

Stand 5I140

“EH Group Engineering is focused on the design & production of our innovative & high performance fuel cell technology for a decarbonised future.

EHG’s uniquely redesigned fuel cells are more compact, lightweight and with higher system efficiencies. In addition, our proprietary manufacturing process under development will make them significantly cheaper.
Faced with the challenges of climate change, pollution abatement and the transition to a decentralised energy system, EHG seeks to provide an efficient and cost-effective solution to power generation.

We always look for smart, highly motivated individuals who share in our vision of realising the transformation to a decarbonised future.”

Stand 4E110

The CATACARB Process is a state-of-the-art CO2 removal and capture technology utilizing hot potassium carbonate (HPC) solution available for license from Eickmeyer & Associates, Inc. Since the first implementation in 1961, over 150 CATACARB units have been constructed around the globe enabling a variety of industries to selectively remove CO2 from mixed-composition gas streams. Each day, CATACARB units remove over 50,000 tons of CO2.

Stand 5H30

The company focuses on component manufacturing for fuel cells and electrolysers. It is also an established supplier to the automotive, healthcare and mechanical engineering industries with core competencies in mould making and small and medium series of moulded parts made of plastic, rubber and silicone.

Eisenhuth has been actively working on the development of bipolar plates for fuel cells based on plastic/graphite composites since 2006. Eisenhuth technologies are already being used successfully in fuel cells and electrolysers. We have been awarded numerous prizes in recent years for our high level of innovation and successful developments. Innovation drives us as a team. Convince yourself.

Stand 6B50

EKPO Fuel Cell Technologies (EKPO) is a leading joint venture in the development and large-scale production of fuel cell stacks for CO2-neutral mobility. The company is a full-service supplier for fuel cell stacks and components used in passenger cars, light commercial vehicles, trucks, buses, as well as in train and marine applications. Within this context, the company is building on the industrialization expertise of two established international automotive suppliers – ElringKlinger and Plastic Omnium.

Stand 5I110

ELAFLEX is a premium system supplier for refuelling equipment and safe connections for the transfer of dangerous goods and sensitive fluids, setting standards since 1923. We will present new refuelling products for alternative fuels such as H2, Carbon Capture and others.

Stand 6E210

Our solid oxide fuel cell (SOFC) and solid oxide electrolyser cell (SOEC) technology is a key enabler in making the energy transition affordable for everyone.

Stand 5E40

Elite KL Ltd design validate and manufacture thermal management solutions for the automotive, construction, ground support, rail and defence vehicle markets. Our engineering expertise includes electric vehicle battery, hydrogen fuel cell cooling, powertrain equipment cooling, Heating Ventilation Air Conditioning (HVAC) and integration of whole vehicle thermal solutions.

Stand 6C18

Quality, pleasure in innovative processing techniques and highly motivated staff are the Elkamet Kunststofftechnik GmbH success factors. Founded in 1955 and based in Biedenkopf, central Hesse, the family-run company managed by Eberhard Flammer and Michael Parsch is a fast-growing firm with a strong export division.

Elkamet produces extruded profiles from industrial polymer materials for the vehicle and lighting industries as well as PA/PE/XPE tanks for fuel and hydraulic systems which are used in utility vehicles and motorcycles. Elkamet manufactures mudguards and vent system tubes for utility vehicles.

Stand 4B80

～Supporting the world with passion through technology～ Ebara Corporation supports society, industry, and life on a global scale. In the 111 years since our founding, we have contributed broadly to society by providing superior technology and the best services in the fields of water, air, and the environment.

The EBARA Group has set a company-wide goal of contributing to the realization of a hydrogen society, which is indispensable for “creating a sustainable society.”

Companies around the world choose Elliott Group (a wholly owned subsidiary of Ebara Corporation) to design, manufacture, and service their critical turbo machinery, including compressors, steam turbines, power recovery expanders and cryogenic pumps.

Stand 6F130

Elmac Technologies is the leader in the design, manufacture, and supply of flame and explosion arresters, tank vents, and more. Our focus on innovation and quality ensures that our products deliver exceptional performance and reliability for your peace of mind.

Stand 6E10

ELMESS-Thermosystemtechnik from Germany is one of the world’s leading manufacturers of electrical heaters, heating systems, monitoring equipment and control systems for industrial applications. With more than 75 years of experience, we are specialists for heaters for explosion hazardous areas (certificates according ATEX, IECEx, EAC, CCC etc.).
We offer heating solutions, designed and manufactured according to customer’s requirements, including technical advice, full documentation and after-sales-service.

ELMESS are specialists for electrical gas heaters: hydrogen, nitrogen, oxygen, process gas, natural gas, seal gas, fuel gas, industrial gases, air as well as vaporizers for liquified gas, as well as lube oil heaters or thyristor control panels. The range is from 0.5 kW up to 2000 kW. The operating temperature is up to 1000°C, operating pressure up to 500 bar.

ELMESS stands for quality, reliability and safety. Made in Germany.

Stand 5I70

Elogen, a technology expert at the service of green hydrogen. Elogen develops advanced technologies for the design and manufacture of PEM (Proton Exchange Membrane) electrolyzers to open up new applications for hydrogen in the mobility, industrial and energy storage sectors. Elogen, a company of the GTT technologygroup, relies on powerful research and development and a robust manufacturing process to provide its customers with competitive, reliable systems tailored to their needs. The technological solutions developed by Elogen, particularly suitable for renewable energies, are characterized by high efficiency and competitiveness.

Stand 6B50

ElringKlinger Engineered Plastics is a leading manufacturer in the field of high-performance plastics and offers a wide range of products along the H₂ value chain.

Individual, field-tested and innovative engineering solutions for PtX applications – from electrolysis to transport /storage and mobile use. Numerous validated manufacturing processes, in-house compounding and product development round off the advantages for our customers.

Stand 7C80

Eltek’s expertise includes technology for SCR, Water Injection and FuelCell Electric Vehicles, Autonomous Driving and Transportation application: pressure, capacitive level, temperature, fluid quality, gas concentration, force, strain&load sensors.

We are able to provide our customer with different sensing technologies, fluid heating and solenoid applications, all customizable according to individual needs.

Stand 4D90

Many of the industry’s standard approaches were created decades ago, long before today’s innovation. Doing more of the same is yielding only incremental benefits and management expects you to deliver better results. With a partner like Emerson, you can. Our automation expertise – from projects to operations – is focused on helping you hit your targets and move your organization into Top Quartile performance.

Stand 6A50

Emitech Group is a french independent group with more than 600 employees specialized in environmental testing, as well as in the validation and design of powertrain.

Stand 4F90

Endrava helps others reduce greenhouse gas emissions. Since 2012, the team from Endrava has worked with climate for private and public organisations, across sectors: transport, industry, energy, production and consumption. The company was originally established as a consulting firm in 2016, and now focuses on tool development for the green transition.

Stand 5G50

Endress+Hauser devices, solutions and services are at home in many industries. Customers thus use them to gain valuable knowledge from their applications. This enables them to improve their products, work economically and at the same time protect people and the environment.

Stand 5F50

ETZ Ltd is a private sector led, not for profit company created to drive forward the vision of transforming the North East of Scotland to become a global leader in energy transition activities and a net exporter of energy transition technologies and skills.

Stand 7B50

As an independent energy company, we generate electricity and heat exclusively from renewable sources and supply safe, inexpensive renewable energy for all areas of life.

Stand 7D55

ENGINIUS is the first vehicle manufacturer to receive EU type approval for electric trucks with hydrogen fuel cells. 100 hydrogen trucks are on the road so far. We want to become the European market leader for hydrogen-powered trucks on short and medium-haul routes by 2030.

Stand 6A30

“The Ensinger Group is engaged in the development, manufacture and sale of compounds, semi-finished materials, composites, technical parts and profiles made of engineering and high-performance plastics. To process the thermoplastic polymers, Ensinger uses a wide range of production techniques, such as extrusion, machining, injection moulding, casting, sintering and pressing.”

Stand 5J110

With 50+ years of proven materials science experience in the most demanding industries, Entegris offers fuel cell producers, pipelines, and onsite refuelers liquid and gaseous purification to meet SAEJ2719 fuel performance standards. Join us at the Entegris exhibit, booth 6398, to learn more and connect with our experts.

Stand 6B120

EODev is an innovative greentech industrial company founded in France in 2019 with the aim of accelerating the energy transition thanks to sustainable, reliable and affordable energy solutions using hydrogen. In particular, EODev is a world leader in the design and industrialization of zero-emission power generation systems.

Stand 6E30

Equilibar® dome-loaded, multiple-orifice back pressure regulators provide novel solutions for demanding fluid control challenges. They are easily automated and respond in milliseconds to accurately maintain control, making them ideal for electrolysis applications. Pressure Control Solutions specializes in precision process control, combining Equilibar fluid control products with high quality electronic components.

Stand 4C140

We aim to be a leading company in the energy transition, continuing to supply society with the energy we need while reducing emissions and reaching net zero by 2050. We will break new ground and create value by building on our 50 years of industrial experience.

Stand 7D50

At Erlson Group we have more than 30 years’ experience in machining compressor wheels, turbine wheels and shafts for Fuel Cell Compressors and commercial/passenger vehicle applications. With over 70 years of expertise in manufacturing, we are well positioned to cover your machining and casting needs.
With full automotive IATF16949 & ISO 14001 accreditation, we have the technology and expertise to deliver high quality machined components into various Industries, such as Turbochargers, Fuel Cell Compressors, Heat Pumps-Industrial and High speed motors.

Stand 7B55

ESG Review is devoted to the environmental, social, and governance (ESG) strategies, technologies, and investments that companies are making to create sustainability over the long term. ESG Review is both a quarterly magazine and a weekly journal. ESG Review magazine is delivered in print and digital formats in February, May, August, and November. Free to subscribe, readers can choose their preferred delivery method (or both!). Esgreview.net is updated each Wednesday at noon CST with all new content. Bookmark the site today and never miss a story.

Stand 5G10

Design and manufacturers of pressure transducers, transmitters and sensors across industry sectors including aerospace, defence, O&G, subsea, medical, automotive, marine, and general industrial. Our unique Silicon-on-Sapphire sensing technology has a proven track record of outstanding performance and reliability that has secured our place as industry leaders for pressure measurement solutions.

Stand 4E80

Our vision is to deliver technology to produce two key products for a renewable world at the lowest operation cost: Renewable natural gas (Biomethane) and Liquid CO2, to be either used fr carbon usage or for permanent removal from the atmosphere and carbon storage.

Stand 5J149

EUROWATER treat water. From raw water to ultrapure water. We develop and manufacture reliable water treatment plants and done it since 1936. Thanks to a broad standard programme, years of experience and technical know-how, we can supply complete solutions regardless of source water and type of electrolyzer technology.

Stand 5I30

EV Hydrogen(known as EV Metal) was founded in 1932 and the business profile has developed a lot since then. Established in the machine building industry and in the automotive industry and later in the 1960´s beginning the manufacturing of quality industrial valves and fittings, EV Metal is today a respected supplier of precision machined parts, fittings, and valve solutions for multiple industrial sectors.

Stand 6B166

We are the largest supplier of water services to the Dutch industry. We also develop water services for and with our clients In England, Germany and Belgium and in the upcoming green Hydrogene production.

Stand 5H10

Evonik is a global membrane technology leader for the gas industry. By offering its innovative gas separation and ion-conducting membranes, the specialty chemicals company makes the transition of todays conventional energy supply to a sustainable gas economy of tomorrow possible. #SustainableGasEconomy

Stand 6F40

At Exion, Human Capital comes first – finding the best colleagues and continuously improving their specific knowledge. Invest in thorough testing, and developing the most efficient hydrogen production plant to serve our customers in the best way.

Stand 5F20

The need for energy is universal. That’s why ExxonMobil scientists and engineers are pioneering new research and pursuing new technologies to reduce emissions while creating more efficient fuels. We’re committed to responsibly meeting the world’s energy needs.

Stand 7C30

Fab 4.0 Hose S.L. is a company specialized in the design and production of silicone components in VMQ and FVMQ quality for air, liquid and thermal insulation applications for OEM’s speciallized in hydrogen.

Stand 6A70

Faber Industrie is a world’s leading company in the design, manufacturing, testing and marketing of high-pressure gas cylinders and systems used for Clean Energy (CNG & Hydrogen), Industrial (Technical, Medical, Special, Food&Beverage and Fire-Fighting gases) and Air Breathing Apparatus (SCUBA & SCBA).

Stand 5B30

“Feintool is an internationally active technology and market leader in fineblanking, forming and electrolamination stamping for processing steel sheets. Cost-effectiveness, superior quality and productivity characterize these technologies.

As an innovation driver, Feintool constantly pushes the boundaries of these technologies and develops intelligent solutions to meet its customers’ requirements: On the one hand, high-performance fineblanking systems with innovative tools and state-of-the-art manufacturing processes, and on the other, complete processes for precise fineblanking, forming and stamped electrical sheet components in high volumes for demanding automotive and industrial applications.”

Stand 5D60

The 3-level strategy: “Energy Technology – Automation – IT” enables us to offer and implement comprehensive, individualized solutions for the production processes of our customers around the world. With our currently 7 locations worldwide in Germany, Austria, Russia and India and a total of around 230 employees, we are able to support large projects and industrial customers around the world with our technological know-how and our 50 years of experience.

Stand 5J30

Festo, the world’s leading supplier of automation technology and technical education, is deploying its products and services to meet the challenge of smart production for the future. The Festo Group registered sales of €3.81 billion in 2022 and is represented at 250 locations throughout the world with a total of 20,800 employees. With our many years of experience in the field of gas processing and our automation solutions for the production, infrastructure and use of hydrogen, we provide you with support along the entire value chain. Together for a sustainable future – we are your partner for the automation of hydrogen production.

Stand 5I100

FEV is a leading international, independent service provider for hardware and software in vehicle and powertrain development, as well as the energy industry. The range of competencies includes the development and testing of innovative solutions up to series production and all related consulting services.

Stand 7C40

FillnDrive offers digital solutions and electronic devices that offer a unique user experience for charging a vehicle (H2 or NGV or battery) as well as providing an appropriate management tool for operators or fleet managers.

Our Brand new calculating & indicating device is OIML R139 certified and is dedicated to H2 and CNG Dispenser manufacturers to enhance the drive experience in Station.

We also offer a robust software solution with the best user experience for drivers, fleet managers & stations operators including fleet card, collaborative data platform, payment systems and user mobile App.

Filling the need for clean energy is our mission!

Stand 6C25

In 1979, the Wu brothers established FineTek Technologies with the core value of “providing complete customized solutions to meet customers’ needs”, manufacturing quality industrial sensors for level measurement of powder & bulk solids  and liquid;flow; pressure, and temperature. Since 1999, the company has expanded its operations both locally and internationally, providing customers with excellent service and improved solutions. Our purpose is to assist in fulfilling our customers’ needs through FineTek’s innovative solutions and quality products, thereby achieving customer satisfaction and success.

Stand 5E80

FISCHER Fuel Cell Compressor AG is technology leader in the field of air compressors for fuel cell technology and is part of FISCHER Spindle Group AG. WEICHAI Power acquired a stake in FFCC. The two companies founded a joint venture in China. Together they invest in setting up global series production.

Stand 5I20

Founded in 1998, FITOK Group has been an industry-leading developer and manufacturer of superior quality instrumentation valves and fittings, having our manufacturing bases in Germany, USA, South Korea and Wuhan, Shenzhen and Suzhou in China, and sales & service centers in Germany, USA, China and UAE.

Stand 6E140

Manufacture of Flame arresters approved to ATEX Directive 2014/34 EU through a notified body (3rd party) in accordance to EN ISO 16852 – ATEX certificate. Our products are used for the analysis, storage, measurement and transportation of gases. We are supplying high-quality products to our customers in and outside Germany since 1997. As OEM supplier of flame arresters and flow straighteners, we have successfully developed cost-efficient solutions that meet the very high safety and engineering standards of our customers.

Stand 5F50

Making the world safer & cleaner through engineered sealing solutions

Stand 7E80

Flow helps teams get their product certified and meet regulatory compliance faster than any tool in the market. Flow is the only requirements tool to combine the ease-of-use of notion with the rigour and traceability of IBM DOORs, enabling teams to start fast, and add structure as their project matures. Flow is helping aerospace, defense and automotive teams meet critical functional safety standards such as ARP 4754A, DO-254, ISO 26262.

Stand 5J160

Flow helps teams get their product certified and meet regulatory compliance faster than any tool in the market. Flow is the only requirements tool to combine the ease-of-use of notion with the rigour and traceability of IBM DOORs, enabling teams to start fast, and add structure as their project matures.

Stand 6D145

We design, build, and race hydrogen-powered race cars. With our cars, we aim to demonstrate all that is possible for hydrogen in motorsports, mobility, and more.

Stand 6A100

FRANK. Plastic in good hands.
FRANK has been using plastics since the 1960s to make pipe systems and tanks resistant, corrosion-proof and usable for more than 100 years. Our pipe systems and tanks solve essential problems: Because they secure the supply of clean drinking water and gas for the population, make regenerative energy sources usable and enable innovative processes in research and industry. At the same time, they protect the environment from waste water and are easily recyclable after use.
www.frank-gmbh.de

Stand 5K30

“Fraunhofer IFAM is one of the most important research institutions in Europe for adhesive bonding technology, surfaces, shaping and functional materials. At our institute’s five locations – Bremen, Dresden, Oldenburg, Stade and Wolfsburg – we put our central principles into practice: scientific excellence, a focus on the application of technology, measurable utility for customers and ensuring the highest quality.”

Stand 6B10

At Hydrogen Technology Expo Europe 2023, we showcase selected developments from our Division Energy. These include our fuel processors and reformer systems, our catalytic combustion reactor technology, and our methanation technology.

As experts in microtechnology, we develop reformers and complete fuel processors for hydrogen supply in fuel cells. Due to their high availability, higher power density and ease of transport, hydrogen carriers such as ammonia and methanol are attractive alternatives to compressed hydrogen for many portable and mobile applications.

We develop catalysts and catalytic coatings for micro-structures, which are optimally adapted to reactor type and process scale. Improving the properties of existing catalysts for reliable use in the actual process environment is also part of our service portfolio.

We have successfully developed a carbon dioxide methanation process using its micro-structured reactor technology. The IMM methanation process operates a highly efficient heat management system, leading to high conversion and selectivity.

Stand 5B200

Our innovative material and functional solutions deliver convincing performance to leading industrial partners in key international business sectors. The family-owned company from Upper Franconia, Germany develops, produces and sells gaskets and gasket materials, insulation and insulation materials for various industries as well as expansion joints for plant engineering. This is possible thanks to the dedicated and skilled work of around 500 employees at seven national and international locations.

Stand 5H150

Freudenberg Sealing Technologies is a leading supplier of advanced materials and products for customers working on automotive, industrial and alternate drivetrain applications. The company applies more than 150 years of engineering and materials expertise to its strategy of researching, developing and introducing innovative product and process solutions. It is focused on serving its customers’ most progressive (or cutting-edge) industrial opportunities and needs.

Stand 6F10

We are the drivers of the European energy transition. In our core markets of natural gas, electricity and hydrogen, we offer our customers innovative and reliable solutions for the energy infrastructure of tomorrow.

Stand 6F80

Fuel Cell Technology Sweden AB (FCT Sweden) is a Swedish innovation company with a green and sustainable technology portfolio. The company was founded 2022 with a technology heritage spun out of research at KTH, Royal Institute of Technology in Stockholm.
We are a Technology Solution Provider who offer thin, hydrogen powered, modular and scalable PEM fuel cells which are adoptable to different electrified application. We focus on a power range from 1W to 3KW.
FCT Sweden world leading in micro fuel cells, where our own patented fuel cells give a very high volumetric energy density. Our hybrid solution combines accumulators like batteries or ultra-capacitors with our hydrogen powered micro fuel cells for maximised uptime with no other byproducts them pure water.

Stand 6D50

In a new era, things that did not exist become necessary. Fujikin is part of that process, creating and delivering high grade “flow control” core technology solutions to everyone.

Stand 4E140

We design and manufacture composite piping solutions for use across the Oil & Gas, Industrial, Water, and Marine & Offshore Industries.

Our solutions include piping system design, manufacturing, engineering services, project management, technical support, field supervision, and training.

Stand 7C25

Die G. BOPP + Co. AG ist einer der weltweit führenden Hersteller von Metallgeweben (Metalldrahtgewebe, Stahlgewebe, Edelstahlgewebe) mit eigenen Standorten in der Schweiz, in Deutschland, England, Italien, Schweden, USA, Korea und China. Die hochwertigen Metallgewebe (Feinstgewebe, Feindrahtgewebe) werden als Quadratmaschengewebe zum Sieben und Klassieren, als Edelstahlgazen im Siebdruck, als Filtergewebe und Laminate, sowie als Gitter in den unterschiedlichsten Anwendungen weltweit verwendet. Die konfektionierten Produkte werden eingesetzt in praktisch allen Branchen wie Chemie, Pharmaindustrie, in der Glas-, Keramik-, Kunststoffindustrie, im Maschinenbau, in der Papierindustrie in der Umwelttechnik bis hin zur Raumfahrt.

Stand 7C45

Gangwon Techno Park and Gangwon-do, which are innovative institutions in Korea, will challenge the liquefied hydrogen industry with local innovative companies. It introduces domestic venture companies that jump into the entire industry, including hydrogen production, storage, transportation, charging, mobility, and liquefied hydrogen utilization.

Stand 5J170

Garlock, part of Enpro, is one of the leading international companies in the field of sealing technology and is regarded as a specialist for the sealing of critical and demanding media in innovative mechanical and plant engineering. We also offer sealing solutions to the emerging hydrogen economy in Europe.

Stand 7B55

Gas Compression Magazine provides in-depth coverage of the products, systems, technologies, and news that affect the global gas compression industry. Upstream, midstream, and downstream, Gas Compression Magazine is your source for gas compression news and information. Published monthly, Gas Compression Magazine is delivered to the people who manufacture, maintain, purchase, package, and teach gas compression products and systems. Offered in print and digital formats, readers can choose their preferred delivery method (or both!). Free to subscribe and free to renew, sign up today at www.gascompressionmagazine.com.

Stand 4D60

GEA aims to provide its customers with sustainable value creation and future-proof ideas for continued success. Be it through our technologies for water treatment, safe food and pharmaceuticals, or a host of other efficient products and process technologies. We call this “Engineering for a better world.” And this is what motivates us every day.

Stand 6A90

Kernkompetenz in professionellen Industriearmaturen, zuverlässig, sicher und langlebig. Armaturen für einen sicheren Betrieb, egal ob Standard-Armatur oder Sonderanfertigung.

Stand 5D29

Groningen is at the forefront of renewable energy development. In the field of green hydrogen, Groningen is even a frontrunner in Europe. Being the first European region, Groningen earned the title of Hydrogen Valley. Smart pioneers collaborate here to drive the new hydrogen economy forward.

Stand 6E170

Valve, Measurement and Control Systems for Hydrogen Applications. Having excellent references in the industrial markets shows that we clearly understand your requirements. With our comprehensive range of products, we meet the demands of applications such as water treatment, electrolysis, gas treatment and Power-to-Liquid: The specific requirements of these sectors are met by our flexible product range.

Stand 6F70

Genevos provides an end-to-end solution to achieve hydrogen power on board a vessel. Solutions include certified Hydrogen Power Modules (HPMs) in stackable units up to MW scale, integration design engineering services, system installation, remote monitoring, power management optimisations, and annual service packs.

Stand 5E68

PFor its expertise in the measurement and control of pressure and temperature, in the processing, conditioning and security of electrical signals,
in industry, military shipbuilding, railways and electricity (production and transmission of nuclear, thermal and hydraulic electricity).

Our strategy is to consolidate our position as an international benchmark in the SAFETY Of INDUSTRIAL PROCESSES

Stand 5F70

Gerard Daniel provides mesh solutions for fuel cell and electrolyzer applications. We source and manufacture many alloys and mesh media, giving a wide variety of porosity and surface area permutations. We pioneered the technology ‘Cold Bond’ providing rigidity and improved conductivity to the mesh. Our many locations supply companies globally.

Stand 5H130

VON ARDENNE, Weil Technology and ZELTWANGER have asked themselves this question together. You can benefit from the expertise of all three companies at every step in the process chain and get your production ready for the fuel cell or electrolyzer of the future.

Stand 5G61

Transitioning to a green hydrogen economy requires designing and implementing technology solutions to encourage the building of hydrogen infrastructures.

We have a leading role throughout the entire chain, from production, processing, transportation, and storage, to distribution.

Improving technology and economy of scale will result in new sustainable and competitive practices that will make us evolve from the current energy system to a GREEN HYDROGEN ERA.

Stand 5G130

“For more than 60 years, GfG has been committed to protecting people, plants and the environment through the development and production of gas detection systems. With an extensive assortment of portable gas detectors and stationary gas detection systems, GfG offers a wide range of products for many applications and industries. We also offer first class on-site service and advanced training courses. Specific training for users to become qualified with the operation and maintenance of the equipment is available, and will ensure that participants bring highest performance and uncompromising safety, reliability and convenience to your workplace.”

Stand 4F110

Supplier of a Process Design Package and License Know-How for Carbon Dioxide Removal Plants based on Hot Potassium Carbonate solutions. Assisting Client from the Basic Engineering Design up to the Commissioning/Start-up.

Stand 4D170

GIG Karasek is a globally acting Austrian supplier of high-quality industrial plants for thermal separation and focuses on the design and manufacturing of falling-film, thin-film-, short-path-, distillation and drying technology. Its machinery and plants are mainly applied in the production processes of the pulp (kraft, sulfite, dissolving), (bio)refinery, fiber, alternative fuel, chemical, (bio)plastic, food and feed industry as well as for processing industrial wastewater.
GIG Karasek, part of Dr. Aichhorn Group, has completed numerous projects around the globe

Stand 5D10

Gilbarco Veeder-Root are industry leaders in the supply of innovative and quality engineered refuelling equipment and services. Their all-new Hydrogen Refuelling Station (HRS) solutions are designed to offer safe, seamless, and fast refuelling of 35 and 70 MPa fuel cell electric vehicles.

Stand 6E190

The German-Algerian Energy Partnership was founded in 2015 and has since been a lively platform for an exchange on the accelerated development of renewable energies for the benefit of Algeria, Germany and Europe.

Stand 6A80

As a technology leader in advanced industrial fabrics, GKD supports the efficient production and use of green hydrogen in industrial processes. For alkaline water electrolysis, we provide nickel-based woven electrodes to help expand a green hydrogen economy. Our woven filter solutions are used in solid sorbent-based direct air capture processes.

Stand 5B40

GKN Hydrogen is pioneering safe and emission-free storage of green hydrogen to drive the global energy transition. Our metal hydride storage is the most reliable and secure solution on the market. It generates green hydrogen from fluctuating renewable energy sources, storing it safely over a long period of time.

Stand 5A70

For over 70 years, Goetze KG Armaturen has been manufacturing sophisticated high-performance valves and fittings for media under pressure: liquids, air, gases and vapours. Goetze has made themselves a reputation worldwide with their high level of quality Made in Germany.

Stand 5A90

GP JOULE Hydrogen, brings the know-how of more than ten years of hydrogen research and development to the road. From hydrogen production from renewable energies to storage and transport to the construction of hydrogen filling stations and their ongoing operation, from customer activation to vehicle procurement and subsidy acquisition.

Stand 7C60

GPT Industries is the world’s leading manufacturer of critical pipeline sealing and electrical isolation products. With a focus on safety, performance and reliability, we employ advanced engineering and manufacturing processes to meet the challenging demands of the oil and gas, water/wastewater, Hydrogen, carbon capture and construction and infrastructure industries.

Stand 5H40

Graebener Bipolar Plate Technologies realizes customized production lines for the cost-effective production of metal bipolar plates. We accompany all steps from engineering with a view to plate design and plant technology via prototyping and pre-buy service in our in-house application lab up to your individual production plant or line.

Stand 6E40

POWER SUPPLIES FOR LARGE-SCALE GREEN HYDROGEN ELECTROLYSIS: 20years of rectification experience,50+exporting countries,200+hydrogen production projects,150+ sets of 1000Nm3/h electrolysis rectifier perfermance.

Stand 5E50

Greene, Tweed is specialized in high performance elastomers, thermoplastics, and composite materials for demanding environments like Hydrogen or CCUS markets. We have developed a complete portfolio of products for these markets that includes Arlon® 3000XT, the only cross-linked PEEK available in the market and Fusion® 938 RGD-resistant FKM O-rings.